Brandschutzstele
Brandschutzstele
Brandschutzstele
Brandschutzstele
Brandschutzstele
Brandschutzstele

HAG-BR-30-Kiosk Portrait 46/48″

Fire protection totem

  • Item no.: 2106
  • 46 / 48″ | 117 / 122 cm
  • Portrait
  • enclosed in a metal casing
  • produced according to fire resistance EI30
  • certified material (DIN EN 13501-1/A1 – s1, d0)
  • suitable for installation of screens in emergency and
    escape routes (with EI30 stipulations)
  • smoke protection / encapsulation of fire load
  • 15 mm thick fire resisting glass with gel coat
  • 2 installation options (free-standing or floor mounting)
Data sheet
Item name

HAG-BR-30-Kiosk Portrait 46/48"
Screen size

46 / 48", 117 / 122 cm
Format

Portrait
VESA

VESA mount, adapted to the hole pattern of the screen
Dimensions

H 1950 x W 809 x D 218 mm
Colour

white (RAL 9010) – further RAL colour on request
Special features

– produced according to fire resistance EI30
– certified material (DIN EN 13501-1/A1 – s1, d0)
– suitable for installation of screens in emergency and escape routes (with EI30 stipulations)
– encapsulation of fire load
– 15 mm thick fire resisting glass with gel coat
– delivery is largely pre-assembled
– 2 installation options (free-standing or floor mounting)
Optionally

HAG-BR-30-Kiosk Base plate (Item no.: 2801)

HAG-BR-30-Kiosk Set of castors (Item no.: 2802)
Can only be used in conjunction with the base plate

HAG-BR-30 fire protection flap set (Item no.: 2800)
optional ventilation for high brightness screens,
closes at an ambient temperature of 72° C

HAG-BR-30-Kiosk Portrait
Fire protection totem

The HAG-BR-30 Kiosk Portrait are fire protection totems, which are suitable for the inclusion of a screen in portrait format. Three different sizes are available. When executing the HAG-BR-30 Kiosk Portrait, the requirements of the EU directive EN 13501-1 / A1-s1, d0) are fulfilled. The protective totems are suitable for screens in escape and rescue routes with an EI30 regulation and they are also MPA tested.

Each model is supplied with 15 mm thick fire resisting glass with gel coat as well as a closed rear wall plate with cable feedthrough.

The fire protection totem series includes smoke protection with smoke protection seals as standard and a cable feedtrough through the fire protection seal.

A firmly lockable VESA universal mount is included. The VESA mount meets the VESA standard and is adapted to the respective hole pattern on the screen.

The standard housing colour is white (RAL 9010); further RAL colours are possible on request.

IMPORTANT! Please note that the fire protection totems are not suitable for use in conjunction with high-brightness screens.

Data sheet: HAG-BR-30-Portrait | Fire protection totem

Manual: HAG-BR-30-Portrait | Fire protection totem