HAG-BR-30
HAG-BR-30

HAG-BR-30 | 40 – 43″ | Portrait

Fire protection enclosure

  • Item no.: 1884
  • 40 – 43″ | 101 – 109 cm
  • Portrait
  • VESA max. 400 x 400 mm
  • certified material (DIN EN 13501-1/A1 – s1, d0)
  • suitable for installation of screens in emergency
    and escape routes (with EI30 stipulations)
  • encapsulation of fire load
  • 15 mm thick fire-resisting glass with gel coat
  • Cable feedthrough with fire retardant seal
  • incl. passepartout with “Active Area” cutout
Data sheet
Item name

HAG-BR-30, 40 – 43", Portrait
Screen size

40 – 43", 101 – 109 cm
Format

Portrait
VESA

max. 400 x 400 mm
Assembly

direct wall mounting
Dimensions

H 1091 x W 679 x D 215 mm (outside)
H 1041 x W 629 x D 154,5 mm (inside)
Weight

88 kg
Load, max.

40 kg
Colour

white (similar to RAL 9010) – other RAL colours are possible on request
Wattage

max. 70 W
Not suitable for high-brightness screens
Special features

– produced according to fire resistance EI30
– certified material (DIN EN 13501-1/A1 – s1, d0)
– suitable for installation of screens in emergency and escape routes (with EI30 stipulations)
– encapsulation of fire load
– 15 mm thick fire-resisting glass with gel coat
– Cable feedthrough with fire retardant seal
– incl. passepartout with "Active Area" cutout
– pre-assembled
Optionally

Additional ventilation by fire protection flap set (Item no.: 2800),
ventilation is provided by a chimney effect

HAG-BR-30 Portrait
Fire protection enclosure, according to EI30 regulations

The HAG-BR-30 Portrait is a fire protection enclosure for wall mounting. Suitable for a screen with a maximum size of 65″ in landscape orientation.

With the HAG-BR-30 Portrait version, the requirements of the EU directive EN 13501-1-A1 (formerly DIN 4102-1-A2) are fulfilled. The protective enclosures are
suitable for mounting screens in escape and rescue routes with an EI30 regulation and they are also MPA tested.

Each model is supplied with 15 mm thick fire-resisting glass with gel coat as well as a closed rear wall plate with cable feedthrough. The fire protection enclosure series contains smoke protection with smoke protection seals as standard and a cable feedthrough with a fire retardant seal.

The entire mounting material for wall mounting, as well as a firmly lockable VESA universal mount, max. VESA 400 x 400 mm or VESA 800 x 600 mm (from 46 “) are included.

The standard housing colour is white (similar to RAL 9010); further RAL colours are possible on request.

IMPORTANT! Please note that the fire protection housings are not suitable for use in conjunction with high-brightness screens. If this is required, an optionally available additional ventilation is necessary.

Data sheet: HAG-BR-30 Portrait

Manual: HAG-BR-30 Fire protection enclosure