Simple Sale Slider

Featured Products Slider

Best Selling Products

Accessories

LS-1 Plus XL

Soundbar holder

  • Item no.: 7781
  • Adaption for Soundbars
  • For screens from 65 - 86“ | 165 - 218 cm
  • Adaption possible with every VESA universal mount with VESA 600 x 400 mm, max.
  • Length and depth continuously adustable (Tool needed)
  • Installation possible above or beneath the screen
  • Solvent free, scratch and impact resistant powder coating
  • 10 kg load, max.
  • Colour: black

Details Data sheet +Watchlist

rotatable

WH Turn M

Rotatable universal wall mount

  • Item no.: 5760
  • 46 - 55" | 117 - 140 cm
  • VESA 200 x 200, 300 x 300, 400 x 400 mm
  • continuous change of screen format
  • little effort needed thanks to spring mechanism
  • clicks in place in the respective final position (0 / 90°)
  • Release from the end position without unlocking
  • 67 mm Wandabstand
  • 45 kg max. Traglast
  • Colour: black

Details Data sheet +Watchlist

mobile stand system for 2 screens “side-by-side”

  • Item no.: 2336
  • 2x 55 – 65“ | 140 – 165 cm
  • max. VESA 400 x 400 mm (65“)
  • max. VESA 600 x 400 mm (55“)
  • Landscape | Portrait
  • 80 kg (2x 40 kg) load, max.
  • screen height selectable in detents in 50-mm steps (tool needed)
  • internal cable routing
  • rear column cover removable
  • invisibly mounted set of castors
  • expandable with accessories

Details Data sheet +Watchlist

Ceiling mount

  • Item no.: 8601
  • 32 - 49" | 81 - 124 cm
  • Portrait | Landscape
  • incl. TV holding fixture with max. VESA 400 x 400 mm
  • TV holding fixture: -5 / +15° tiltable
  • TV holding fixture: ±30° rotatable
  • variable distance to ceiling: 920 – 3000 mm
  • ceiling module tiltable from 0 to 90°
  • internal cable routeing
  • 50 kg max. load

Details Data sheet +Watchlist

Enclosures | landscape

ScreenOut Pro S Landscape

Outdoor protective enclosure with heating and ventilation

  • Item no.: 1646
  • 40 - 43" | 101 - 109 cm
  • VESA mount, adapted to the hole pattern of the screen
  • Landscape
  • pull-out function for optimal service access
  • suitable for an ambient temperature range between -25 and +40°C
  • fans and heaters according to industry standards
  • Air curtain for monitor front
  • antireflective laminated safety glass
  • variable distance to wall by means of stair bolts

Details Data sheet +Watchlist

Totems | portrait

vis-it HP 40″ Bolt-Down

Indoor totem

  • Item no.: 5825
  • 40" | 102 cm
  • portrait installation
  • thermally hardened safety glass 6 mm
  • the base of the totem can be installed horizontally or vertically, which enables different overalls heights
  • fine adjustment within the mount in height and depth for perfect alignment
  • protection from unauthorized access by way of securiy pin screws
  • space for mini PC or other peripheral equipment
  • Colour: anthracite grey (RAL 7016)
  • fixed floor mounting

Details Data sheet +Watchlist

Fully moveable Desktop Monitor Mount

  • Item no.: 8715
  • 15 - 32" | 38 - 81 cm
  • VESA 75 x 75 mm | 100 x 100 mm
  • Landscape | Portrait
  •  clamp or screw mounting through the table top is possible (Grommet base)
  • -90° / +55° tiltable (VESA mount)
  • ±90° swivelling (VESA mount)
  • ±180° rotatable (support arm)
  • 1,5 up to 9 kg load, max.
  • gas spring hovering system is adjustable to device weight

Details Data sheet +Watchlist

comPROnents component

  • Item no.: 3225
  • wall adapter
  • enables an installation of two CPS-Alu Rails from the wall into the room (back-to-back)
  • ideal for mounting on pillars and walls for high advertising effectiveness in the direction of travel
  • impact and scratch resistant powder coating
  • Colour: black

Details Data sheet +Watchlist

Lookbook style

Lookbook style 2

Grid Style

Masonery Style

Floor-to-wall installation

WH Moto Slim Stud-wall

height adjustable lift system

  • Item no.: 8430
  • 42“ – 75“ | 107 – 191 cm
  • Landscape | Portrait
  • VESA, 200 x 200 mm min. - 800 x 600 mm max.
  • Floor support for optimal weight distribution allows installation on stud walls
  • Electro-motorized height adjustment
  • 600 mm stroke
  • Wired remote control
  • Slim design with only 90 mm depths
  • Cable management with cable clips
  • 100 kg load, max.
  • Solvent free, impact and scratch resistant powder coating in black

Details Data sheet +Watchlist

Floor stands, free standing

HP LED Floorstand Unilumin ULW III 136“

LED, free standing floor stand

  • Item no.: 6269
  • Suitable for Unilumin ULW III 136“
  • Can be mounted in 3 different heights
  • Levelling feet with level control
  • Dimensions: W 3000 x H min. 2590 / max. 2770 x D 900 mm
  • Minimalistic design
  • Solvent free, impact and scratch resisant powder coating
  • Colour: black

Details Data sheet +Watchlist

LED Trolley

  • Item no.: 6268
  • Suitable for Unilumin ULW III 136“
  • Can be mounted in 3 different heights
  • Castors with lock type break
  • Dimensions: W 3000 x H min. 2590 / max. 2770 x D 900 mm
  • Minimalistic design
  • Solvent free, impact and scratch resisant powder coating
  • Colour: black

Details Data sheet +Watchlist

floor-to-wall installation

Pro-Tower Wall Dual

Floor stand for floor-wall mounting with dual VESA mount

  • Item no.: 2879
  • 55 - 65” | 140 - 165 cm
  • VESA, min. 200 x 200 mm - max. 600 x 400 mm
  • Landscape
  • Can be mounted in two heights
  • VESA mount with tilt adjustment
  • Power supply hidden indside the floor stand
  • Integrated power strip with on/off switch
  • Space saving floor-wall mounting
  • AV shelf included (optional use)

Details Data sheet +Watchlist

Optional accessory for CON-Line media steles

  • Item no.: 2882
  • Universal tablet holder for tablets from 9.7“ - 12.4“
  • Suitable for mounting on all CON-Line and CON-Line Big media columns
  • Installation takes place on the side, left of the media column
  • All-round support edges prevent the tablet from slipping out while it is placed in the holder
  • Thanks to the extendable rail, it is possible to adjust the shelf exactly to the width of the tablet
  • Gummed on the inside to protect devices edges
  • Minimal tablet width = 240 mm (9.7“) Maximum tablet width = 290 mm (12.4“)
  • USB-A port on the inside available, e.g. to charge
  • Material: Plastic
  • Colour: black
  • If desired, the holder can also be adapted and manufactured to any other model

Details Data sheet +Watchlist

Media column, free standing, electrically height adjustable

  • Item no.: 2788
  • Hole pattern display specific optimised for Cisco Webex Board Pro 75“
  • Landscape
  • Electro-motorised height adjustment with 500 mm stroke
  • Collision protection - lift stops if there is resistance
  • Push button control with 4 memory slots for presets
  • Ventilation grilles in the corpus
  • Removable AV mounting panel (2 pcs)
  • AV accessories are protected inside of the corpus
  • Frontcover with sliding door incl. soft-close
  • Retractable security lock on the side of the corpus
  • Tilt proof base plate
  • Colour or decor variants for the corpus are available on request - also as unique piece

Details Data sheet +Watchlist

Media column, free standing, electrically height adjustable

  • Item no.: 2786
  • Hole pattern display specific optimised for Cisco Webex Board Pro 55“
  • Landscape
  • Electro-motorised height adjustment with 500 mm stroke
  • Collision protection - lift stops if there is resistance
  • Push button control with 4 memory slots for presets
  • Ventilation grilles in the corpus
  • Removable AV mounting panel (2 pcs)
  • AV accessories are protected inside of the corpus
  • Frontcover with sliding door incl. soft-close
  • Retractable security lock on the side of the corpus
  • Tilt proof base plate
  • Colour or decor variants for the corpus are available on request - also as unique piece

Details Data sheet +Watchlist

Media column, floor-wall mounting, electrically height adjustable

  • Item no.: 2785
  • Hole pattern display specific optimised for Cisco Webex Board Pro 55“
  • Landscape
  • Electro-motorised height adjustment with 500 mm stroke
  • Collision protection - lift stops if there is resistance
  • Push button control with 4 memory slots for presets
  • Ventilation grilles in the corpus
  • Removable AV mounting panel (2 pcs)
  • AV accessories are protected inside of the corpus
  • Frontcover with sliding door incl. soft-close
  • Retractable security lock on the side of the corpus
  • Space saving floor-wall mounting
  • Levelling feet for level compensation Colour or decor variants for the corpus are available on request - also as unique piece

Details Data sheet +Watchlist

Mix and match styles

Floor-to-wall installation

WH Moto Slim Stud-wall

height adjustable lift system

  • Item no.: 8430
  • 42“ – 75“ | 107 – 191 cm
  • Landscape | Portrait
  • VESA, 200 x 200 mm min. - 800 x 600 mm max.
  • Floor support for optimal weight distribution allows installation on stud walls
  • Electro-motorized height adjustment
  • 600 mm stroke
  • Wired remote control
  • Slim design with only 90 mm depths
  • Cable management with cable clips
  • 100 kg load, max.
  • Solvent free, impact and scratch resistant powder coating in black

Details Data sheet +Watchlist

Floor stands, free standing

HP LED Floorstand Unilumin ULW III 136“

LED, free standing floor stand

  • Item no.: 6269
  • Suitable for Unilumin ULW III 136“
  • Can be mounted in 3 different heights
  • Levelling feet with level control
  • Dimensions: W 3000 x H min. 2590 / max. 2770 x D 900 mm
  • Minimalistic design
  • Solvent free, impact and scratch resisant powder coating
  • Colour: black

Details Data sheet +Watchlist

LED Trolley

  • Item no.: 6268
  • Suitable for Unilumin ULW III 136“
  • Can be mounted in 3 different heights
  • Castors with lock type break
  • Dimensions: W 3000 x H min. 2590 / max. 2770 x D 900 mm
  • Minimalistic design
  • Solvent free, impact and scratch resisant powder coating
  • Colour: black

Details Data sheet +Watchlist

floor-to-wall installation

Pro-Tower Wall Dual

Floor stand for floor-wall mounting with dual VESA mount

  • Item no.: 2879
  • 55 - 65” | 140 - 165 cm
  • VESA, min. 200 x 200 mm - max. 600 x 400 mm
  • Landscape
  • Can be mounted in two heights
  • VESA mount with tilt adjustment
  • Power supply hidden indside the floor stand
  • Integrated power strip with on/off switch
  • Space saving floor-wall mounting
  • AV shelf included (optional use)

Details Data sheet +Watchlist

Optional accessory for CON-Line media steles

  • Item no.: 2882
  • Universal tablet holder for tablets from 9.7“ - 12.4“
  • Suitable for mounting on all CON-Line and CON-Line Big media columns
  • Installation takes place on the side, left of the media column
  • All-round support edges prevent the tablet from slipping out while it is placed in the holder
  • Thanks to the extendable rail, it is possible to adjust the shelf exactly to the width of the tablet
  • Gummed on the inside to protect devices edges
  • Minimal tablet width = 240 mm (9.7“) Maximum tablet width = 290 mm (12.4“)
  • USB-A port on the inside available, e.g. to charge
  • Material: Plastic
  • Colour: black
  • If desired, the holder can also be adapted and manufactured to any other model

Details Data sheet +Watchlist

Media column, free standing, electrically height adjustable

  • Item no.: 2788
  • Hole pattern display specific optimised for Cisco Webex Board Pro 75“
  • Landscape
  • Electro-motorised height adjustment with 500 mm stroke
  • Collision protection - lift stops if there is resistance
  • Push button control with 4 memory slots for presets
  • Ventilation grilles in the corpus
  • Removable AV mounting panel (2 pcs)
  • AV accessories are protected inside of the corpus
  • Frontcover with sliding door incl. soft-close
  • Retractable security lock on the side of the corpus
  • Tilt proof base plate
  • Colour or decor variants for the corpus are available on request - also as unique piece

Details Data sheet +Watchlist

Media column, free standing, electrically height adjustable

  • Item no.: 2786
  • Hole pattern display specific optimised for Cisco Webex Board Pro 55“
  • Landscape
  • Electro-motorised height adjustment with 500 mm stroke
  • Collision protection - lift stops if there is resistance
  • Push button control with 4 memory slots for presets
  • Ventilation grilles in the corpus
  • Removable AV mounting panel (2 pcs)
  • AV accessories are protected inside of the corpus
  • Frontcover with sliding door incl. soft-close
  • Retractable security lock on the side of the corpus
  • Tilt proof base plate
  • Colour or decor variants for the corpus are available on request - also as unique piece

Details Data sheet +Watchlist

Media column, floor-wall mounting, electrically height adjustable

  • Item no.: 2785
  • Hole pattern display specific optimised for Cisco Webex Board Pro 55“
  • Landscape
  • Electro-motorised height adjustment with 500 mm stroke
  • Collision protection - lift stops if there is resistance
  • Push button control with 4 memory slots for presets
  • Ventilation grilles in the corpus
  • Removable AV mounting panel (2 pcs)
  • AV accessories are protected inside of the corpus
  • Frontcover with sliding door incl. soft-close
  • Retractable security lock on the side of the corpus
  • Space saving floor-wall mounting
  • Levelling feet for level compensation Colour or decor variants for the corpus are available on request - also as unique piece

Details Data sheet +Watchlist